Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: microcontrollerDescription: FT905/906/907/908 32 The FT90x series 32-bit RISC core microcontroller offers a wide range of connectivity options, making it an ideal choice for advanced technology bridging applications. The performance of executing programs in zero wait state RAM generates 310 DMIPS from a 100MHz clock. When the power is turned on, the program code is automatically transferred from non-volatile memory to shadow memory, where execution can generate a performance of 3.1 DMIPS/MHz. 100MHz 32-bit RISC architecture, providing 3.1DMIPS/MHz performance 256KB flash memory+256KB shadow RAM memory 64KB data SRAM 32.768kHz RTC clock support 4 user timers USB 2.0 high-speed (480Mbps) device controller, with battery charge detection (BCD) USB 2.0 high-speed (480Mbps) EHCI host controller, with BCD simulation 10/100 Base TX Ethernet MAC, with MII interface, compliant with IEEE 802.3/802.3u * * (FT905/906 only) * * 2 CAN 2.0 controllers for data transmission up to 1Mbit/s * * (FT905/907 only) * * SPI slave unit supports single data transmission, reaching 25MHz clock SPI master unit supports single/dual/four modes Data transmission, up to 25MHz clock UART interface configured as 1 full UART or 2 basic UART (TX/RX/CTS/RTS) I ² C bus interface configurable as master or slave unit, up to 3.4 Mbps 7 PWM channel output, supports PCM 8/16 bit stereo audio output 4 analog input channels, achieves 10 bit ADC @ 960KSPS 2 10 bit DACs @ 1MSPS USB DFU boot program power supply:+3.0V to+3.6V DC operating temperature range: -40 to+85 ° C * * RS product code * * 901-5020 FT905L LQFP80 901-5039 FT905Q QFN76 901-5032 FT906L LQFP80 901-5036 FT906Q QFN76 901-5045 FT907L LQFP80 901-5048 FT907Q QFN76 901-5042 FT908L LQFP80 901-5051 FT908Q QFN76 ### FTDI Chip FT90x 32-bit microcontroller59171+$41.422710+$39.0460100+$37.2804250+$37.0088500+$36.73711000+$36.43162500+$36.15995000+$35.9902 -
![]()
Category: microcontrollerDescription: FT900/901/902/903 32 The FT90x series 32-bit RISC core microcontroller offers a wide range of connectivity options, making it an ideal choice for advanced technology bridging applications. The performance of executing programs in zero wait state RAM generates 310 DMIPS from a 100MHz clock. When the power is turned on, the program code is automatically transferred from non-volatile memory to shadow memory, where execution can generate a performance of 3.1 DMIPS/MHz. 100MHz 32-bit RISC architecture, providing 3.1DMIPS/MHz performance 256KB flash memory+256KB shadow RAM memory 64KB data SRAM 32.768kHz RTC clock support 4 user timers 8-bit parallel camera interface USB 2.0 high-speed (480Mbps) device controller, with battery charge detection (BCD) USB 2.0 high-speed (480Mbps) EHCI host controller, with BCD simulation 10/100 Base TX Ethernet MAC, with MII interface, compliant with IEEE 802.3/802.3u * * (FT900/901 only) * * 2 CAN 2.0 controllers for data transmission up to 1Mbit/s * * (FT900/902 only) * * I ² S master/slave interface (24.57/22.57MHz) 2 SPI From the unit, it supports single data transmission and comes with a 25MHz clock SPI. The main unit supports single/dual/quad mode data transmission, with up to 25MHz clock UART interface configuration of 1 full UART or 2 basic UART interfaces UART (TX/RX/CTS/RTS) 2 I ² C bus interfaces, configurable as master or slave unit, up to 3.4Mbps 7 PWM channel outputs, supports PCM 8/16 bit stereo audio output 7 analog input channels, up to 10 bit ADC @ 960KSPS 2 10 bit DACs @ 1MSPS SD V3.0 Host controller supports up to 25MHz SD clock, software supports SD card format SD/SDHC/SDXC USB DFU boot program Power:+3.0V to+3.6V DC Operating temperature range: -40 to+85 ° C * * RS Product code * * 901-5001 FT900L LQFP100 901-5004 FT900Q QFN100 901-5008 FT901L LQFP100 901-5017 FT901Q QFN100 901-5010 FT902L LQFP100 901-5014 FT902Q QFN100 901-5023 FT903L LQFP100 901-5026 FT903Q QFN100 ### FTDI Chip FT90x 32-bit microcontroller69551+$47.472610+$44.7488100+$42.7254250+$42.4141500+$42.10281000+$41.75262500+$41.44135000+$41.2467 -
![]()
Category: microcontrollerDescription: Ic Mcu 8Bit 16KB Mtp 28ssop38295+$25.621850+$24.5269200+$23.9137500+$23.76041000+$23.60712500+$23.43195000+$23.32247500+$23.2129 -
![]()
Category: microcontrollerDescription: FT905/906/907/908 32 The FT90x series 32-bit RISC core microcontroller offers a wide range of connectivity options, making it an ideal choice for advanced technology bridging applications. The performance of executing programs in zero wait state RAM generates 310 DMIPS from a 100MHz clock. When the power is turned on, the program code is automatically transferred from non-volatile memory to shadow memory, where execution can generate a performance of 3.1 DMIPS/MHz. 100MHz 32-bit RISC architecture, providing 3.1DMIPS/MHz performance 256KB flash memory+256KB shadow RAM memory 64KB data SRAM 32.768kHz RTC clock support 4 user timers USB 2.0 high-speed (480Mbps) device controller, with battery charge detection (BCD) USB 2.0 high-speed (480Mbps) EHCI host controller, with BCD simulation 10/100 Base TX Ethernet MAC, with MII interface, compliant with IEEE 802.3/802.3u * * (FT905/906 only) * * 2 CAN 2.0 controllers for data transmission up to 1Mbit/s * * (FT905/907 only) * * SPI slave unit supports single data transmission, reaching 25MHz clock SPI master unit supports single/dual/four modes Data transmission, up to 25MHz clock UART interface configured as 1 full UART or 2 basic UART (TX/RX/CTS/RTS) I ² C bus interface configurable as master or slave unit, up to 3.4 Mbps 7 PWM channel output, supports PCM 8/16 bit stereo audio output 4 analog input channels, achieves 10 bit ADC @ 960KSPS 2 10 bit DACs @ 1MSPS USB DFU boot program power supply:+3.0V to+3.6V DC operating temperature range: -40 to+85 ° C * * RS product code * * 901-5020 FT905L LQFP80 901-5039 FT905Q QFN76 901-5032 FT906L LQFP80 901-5036 FT906Q QFN76 901-5045 FT907L LQFP80 901-5048 FT907Q QFN76 901-5042 FT908L LQFP80 901-5051 FT908Q QFN76 ### FTDI Chip FT90x 32-bit microcontroller86921+$48.032610+$45.2767100+$43.2294250+$42.9144500+$42.59941000+$42.24512500+$41.93015000+$41.7333 -
![]()
Category: microcontrollerDescription: FT51 8 The FT51 microcontroller is an 8-bit 8051 compatible microcontroller with a complete set of USB and other communication interfaces. 48MHz 8051 compatible processor core, with single clock cycle instruction speed 16KB MTP programming+16KB shadow RAM memory 8KB data SRAM USB 2.0 full speed hub controller allows cascading multiple FT51 devices USB 2.0 full speed device controller compatible with FT12 series supports up to 8 bidirectional endpoints, with 2 1KB USB endpoint buffers for USB synchronization endpoints, maximum packet size of 504 bytes for control/batch/interrupt endpoints, maximum packet size of 64 bytes for any endpoint: increases data transfer throughput I ² C HS master/slave interface SPI master/slave interface 60kbps UART interface 3Mbps UART interface supports DMA operation 245 FIFO module provides simple FIFO interface 4 16 bit timers and... 32-bit monitor timer with up to 16 GPIO and up to 16 channels, 8-bit ADC PWM controller USB battery charger detection on-chip debugger power supply:+4.0 to+5.5V DC operating temperature range: -40 to+85 ° C * * RS product code * * 917-0704 FT51AQ QFN48 16 GPIO, 16 AIO 917-0707 FT51AL LQFP44 15 GPIO, 16 AIO 917-0701 FT51BQ QFN32 16 GPIO, 8 AIO 917-0710 FT51CS SSOP28 16 GPIO, 8 AIO # # # FTDI Chip FT51 8-Bit Microcontrollers47445+$29.632650+$28.3662200+$27.6571500+$27.47981000+$27.30252500+$27.09995000+$26.97337500+$26.8466 -
![]()
Category: microcontrollerDescription: FT51 8 The FT51 microcontroller is an 8-bit 8051 compatible microcontroller with a complete set of USB and other communication interfaces. 48MHz 8051 compatible processor core, with single clock cycle instruction speed 16KB MTP programming+16KB shadow RAM memory 8KB data SRAM USB 2.0 full speed hub controller allows cascading multiple FT51 devices USB 2.0 full speed device controller compatible with FT12 series supports up to 8 bidirectional endpoints, with 2 1KB USB endpoint buffers for USB synchronization endpoints, maximum packet size of 504 bytes for control/batch/interrupt endpoints, maximum packet size of 64 bytes for any endpoint: increases data transfer throughput I ² C HS master/slave interface SPI master/slave interface 60kbps UART interface 3Mbps UART interface supports DMA operation 245 FIFO module provides simple FIFO interface 4 16 bit timers and... 32-bit monitor timer with up to 16 GPIO and up to 16 channels, 8-bit ADC PWM controller USB battery charger detection on-chip debugger power supply:+4.0 to+5.5V DC operating temperature range: -40 to+85 ° C * * RS product code * * 917-0704 FT51AQ QFN48 16 GPIO, 16 AIO 917-0707 FT51AL LQFP44 15 GPIO, 16 AIO 917-0701 FT51BQ QFN32 16 GPIO, 8 AIO 917-0710 FT51CS SSOP28 16 GPIO, 8 AIO # # # FTDI Chip FT51 8-Bit Microcontrollers20201+$54.820710+$51.6753100+$49.3386250+$48.9792500+$48.61971000+$48.21532500+$47.85585000+$47.6311 -
![]()
Category: microcontrollerDescription: FT905/906/907/908 32 The FT90x series 32-bit RISC core microcontroller offers a wide range of connectivity options, making it an ideal choice for advanced technology bridging applications. The performance of executing programs in zero wait state RAM generates 310 DMIPS from a 100MHz clock. When the power is turned on, the program code is automatically transferred from non-volatile memory to shadow memory, where execution can generate a performance of 3.1 DMIPS/MHz. 100MHz 32-bit RISC architecture, providing 3.1DMIPS/MHz performance 256KB flash memory+256KB shadow RAM memory 64KB data SRAM 32.768kHz RTC clock support 4 user timers USB 2.0 high-speed (480Mbps) device controller, with battery charge detection (BCD) USB 2.0 high-speed (480Mbps) EHCI host controller, with BCD simulation 10/100 Base TX Ethernet MAC, with MII interface, compliant with IEEE 802.3/802.3u * * (FT905/906 only) * * 2 CAN 2.0 controllers for data transmission up to 1Mbit/s * * (FT905/907 only) * * SPI slave unit supports single data transmission, reaching 25MHz clock SPI master unit supports single/dual/four modes Data transmission, up to 25MHz clock UART interface configured as 1 full UART or 2 basic UART (TX/RX/CTS/RTS) I ² C bus interface configurable as master or slave unit, up to 3.4 Mbps 7 PWM channel output, supports PCM 8/16 bit stereo audio output 4 analog input channels, achieves 10 bit ADC @ 960KSPS 2 10 bit DACs @ 1MSPS USB DFU boot program power supply:+3.0V to+3.6V DC operating temperature range: -40 to+85 ° C * * RS product code * * 901-5020 FT905L LQFP80 901-5039 FT905Q QFN76 901-5032 FT906L LQFP80 901-5036 FT906Q QFN76 901-5045 FT907L LQFP80 901-5048 FT907Q QFN76 901-5042 FT908L LQFP80 901-5051 FT908Q QFN76 ### FTDI Chip FT90x 32-bit microcontroller52901+$46.693110+$44.0140100+$42.0238250+$41.7176500+$41.41141000+$41.06692500+$40.76075000+$40.5694 -
![]()
Category: microcontrollerDescription: FT900/901/902/903 32 The FT90x series 32-bit RISC core microcontroller offers a wide range of connectivity options, making it an ideal choice for advanced technology bridging applications. The performance of executing programs in zero wait state RAM generates 310 DMIPS from a 100MHz clock. When the power is turned on, the program code is automatically transferred from non-volatile memory to shadow memory, where execution can generate a performance of 3.1 DMIPS/MHz. 100MHz 32-bit RISC architecture, providing 3.1DMIPS/MHz performance 256KB flash memory+256KB shadow RAM memory 64KB data SRAM 32.768kHz RTC clock support 4 user timers 8-bit parallel camera interface USB 2.0 high-speed (480Mbps) device controller, with battery charge detection (BCD) USB 2.0 high-speed (480Mbps) EHCI host controller, with BCD simulation 10/100 Base TX Ethernet MAC, with MII interface, compliant with IEEE 802.3/802.3u * * (FT900/901 only) * * 2 CAN 2.0 controllers for data transmission up to 1Mbit/s * * (FT900/902 only) * * I ² S master/slave interface (24.57/22.57MHz) 2 SPI From the unit, it supports single data transmission and comes with a 25MHz clock SPI. The main unit supports single/dual/quad mode data transmission, with up to 25MHz clock UART interface configuration of 1 full UART or 2 basic UART interfaces UART (TX/RX/CTS/RTS) 2 I ² C bus interfaces, configurable as master or slave unit, up to 3.4Mbps 7 PWM channel outputs, supports PCM 8/16 bit stereo audio output 7 analog input channels, up to 10 bit ADC @ 960KSPS 2 10 bit DACs @ 1MSPS SD V3.0 Host controller supports up to 25MHz SD clock, software supports SD card format SD/SDHC/SDXC USB DFU boot program Power:+3.0V to+3.6V DC Operating temperature range: -40 to+85 ° C * * RS Product code * * 901-5001 FT900L LQFP100 901-5004 FT900Q QFN100 901-5008 FT901L LQFP100 901-5017 FT901Q QFN100 901-5010 FT902L LQFP100 901-5014 FT902Q QFN100 901-5023 FT903L LQFP100 901-5026 FT903Q QFN100 ### FTDI Chip FT90x 32-bit microcontroller13641+$47.029810+$44.3314100+$42.3268250+$42.0184500+$41.71001000+$41.36312500+$41.05475000+$40.8619 -
![]()
Category: microcontrollerDescription: FT900/901/902/903 32 The FT90x series 32-bit RISC core microcontroller offers a wide range of connectivity options, making it an ideal choice for advanced technology bridging applications. The performance of executing programs in zero wait state RAM generates 310 DMIPS from a 100MHz clock. When the power is turned on, the program code is automatically transferred from non-volatile memory to shadow memory, where execution can generate a performance of 3.1 DMIPS/MHz. 100MHz 32-bit RISC architecture, providing 3.1DMIPS/MHz performance 256KB flash memory+256KB shadow RAM memory 64KB data SRAM 32.768kHz RTC clock support 4 user timers 8-bit parallel camera interface USB 2.0 high-speed (480Mbps) device controller, with battery charge detection (BCD) USB 2.0 high-speed (480Mbps) EHCI host controller, with BCD simulation 10/100 Base TX Ethernet MAC, with MII interface, compliant with IEEE 802.3/802.3u * * (FT900/901 only) * * 2 CAN 2.0 controllers for data transmission up to 1Mbit/s * * (FT900/902 only) * * I ² S master/slave interface (24.57/22.57MHz) 2 SPI From the unit, it supports single data transmission and comes with a 25MHz clock SPI. The main unit supports single/dual/quad mode data transmission, with up to 25MHz clock UART interface configuration of 1 full UART or 2 basic UART interfaces UART (TX/RX/CTS/RTS) 2 I ² C bus interfaces, configurable as master or slave unit, up to 3.4Mbps 7 PWM channel outputs, supports PCM 8/16 bit stereo audio output 7 analog input channels, up to 10 bit ADC @ 960KSPS 2 10 bit DACs @ 1MSPS SD V3.0 Host controller supports up to 25MHz SD clock, software supports SD card format SD/SDHC/SDXC USB DFU boot program Power:+3.0V to+3.6V DC Operating temperature range: -40 to+85 ° C * * RS Product code * * 901-5001 FT900L LQFP100 901-5004 FT900Q QFN100 901-5008 FT901L LQFP100 901-5017 FT901Q QFN100 901-5010 FT902L LQFP100 901-5014 FT902Q QFN100 901-5023 FT903L LQFP100 901-5026 FT903Q QFN100 ### FTDI Chip FT90x 32-bit microcontroller73901+$55.034210+$51.8765100+$49.5308250+$49.1699500+$48.80901000+$48.40302500+$48.04225000+$47.8166 -
![]()
Category: microcontrollerDescription: Ic Mcu 8Bit 16KB Mtp 32qfn73605+$25.318850+$24.2368200+$23.6309500+$23.47941000+$23.32792500+$23.15485000+$23.04667500+$22.9384
